|
PN
2075 - Combustion and Cold Flow Improver for Domestic Heating
Oil
|
| |
|
| Composition
: |
| |
| Multipurpose
concentrate comprising several constituents: |
| • |
détergent |
| • |
dispersant |
| • |
anti-corrosion agent |
| • |
combustion improver |
| • |
cold
filter plugging improver |
| |
|
| Characteristics
: |
| |
| • |
Appearance
: dark brown-red liquid. |
| • |
Density
at 20 °C : 0,930-0,936 |
| • |
Viscosity
cSt at 20 °C : 4,7-5,8 |
| • |
Flash
point °C : 61-70 |
| • |
Refractive
index : 1,515-1,535 |
| |
|
| Dose
: |
| |
|
| 1
to 2 L per 1000 L of heating oil. |
| |
|
|
| Functions
: |
| |
| • |
Improves
combustion and boiler efficiency. |
| • |
Reduces
emissions of soot and CO and the acidity of flue gases. |
| • |
Prevents
internal corrosion of storage tanks. |
| |
Keeps
the injectors of agricultural tractors clean. |
| • |
Reduces
exhaust fumes. |
| • |
Satisfies
the requirements of the DHYCA - Ministry of Industrial
Affairs - innocuty tests on diesel engines. |
| • |
Saves
fuel. |
| |
|
| Packagings
: |
| |
1
L cans in 6-pack
200 L metal drums
Palletized containers of 1.000 L |
|
|
|
|
|
Soot
Reduction According to the BACHARACH Method
|
|
| The
method consists in passing a precise volume of gas taken from
the flue outlet through a standardized filter paper. The degree
of blackening of the paper is measured against the soot scale
established by Bacharach (slight differences at the bottom of
the scale are determined by means of a photoreffective meter). |
|
|
|
|
|
Reduction
of the Acidity of Smoke
|
|
The
acidity of smoke is due to the presence of sulphur in the heating
oil. Oil containing 0.2 % of sulphur generally gives off smoke
with an acid pH of about 4. Treatment with Eurostar Combustion
Improver neutralizes the smoke at a pH of 7.1 and, at
the same time, removes its corrosion properties.
This is a major contribution to reducing
acid pollution on vegetation, crops and water. |
|
|
Improved
Combustion and Boiler Efficiency
|
|
The
German institute TUV has demonstrated that a burner running
continuously on heating oil not containing an additive had to
be stopped after 200 hours so that the burner head could be
cleaned. The deflector plate and the internal fins were also
covered with substantial sooty deposits. On the other hand,
a burner of the same type was able to operate for 300 hours
in the same conditions without any sooty deposits forming when
the heating oil had had Eurostar added. Improved combustion
has a very positive effect on thermodynamic efficiency and therefore
means reduced consumption.
So a double saving ; lower consumption and lower maintenance
costs. |
|
|
|
Anti-rust
and Anti-corrosion Protection
|
| |
By
preventing the formation of rust particles, pump wear
and the clogging of filters are reduced considerably.
Internal corrosion of storage tanks is avoided. To demonstrate
the anti-rust effect, laboratories generally use the ASTM
D 655 METHOD.
Oppsite is a photo of parts that have been immersed in
heating oil : untreated (!) and 1/1000 treated with Eurostar
Combustion Improver (2). |
|
|
|
|
|
| |
|
